Galvanized roller in use should pay attention to the following matters:

Before finishing the galvanized roller must wear dust gloves and masks and drive, check whether the equipment is running normally, whether there is any defect, whether the fastener is loose; Use of galvanized roller, should pay attention to avoid the attack of rotation injury, before loading should be fixed with the roller pin; After the casting is installed on the galvanized roller, the cover must be covered and bolted down. Finish the first start ventilation equipment, and then open the roller.

When unloading casting should pay attention to the galvanized roller must be turned to the front and check the bolt fixed before opening the cylinder cover; During the actual operation of galvanized roller, personnel shall not approach; Again is someone impatient, in the equipment before the leaf is not completely stopped to open the cylinder cover, which is very risky; In summary, even if the equipment has brought us a lot of convenience, but the safety of permanent place!

Basic information of rubber roller:

Cots are widely used in industries such as steel, power generation, metallurgy, coal, cement, fertilizer, grain depot, port, etc. The rubber roller is indispensable for the belt conveyor and is an important component of its assembly line system.

Use glue roller, the roller plastic bags can be very effective to reduce friction between belt and roller, prevent metal roller is not wear and greatly reduce running deviation of belt conveyor, also make defiled with sticky on the surface of the material is not easy, and so, plastic bags of roller belt conveyor line is very important, it effectively improved the operation of belt conveyor line transmission system.

Rubber roller will be restricted by some factors, mainly in the rubber roller material, that is, the quality of rubber; There is also which kind of coating technology is used, the current application of many enterprises is cold vulcanizing coating technology, relatively speaking, hot vulcanizing coating technology has been replaced by cold vulcanizing coating technology; Still have the craft technology problem of worker of pack rubber, regard construction technology as, must have good material quality and technology.