Conveying roller in use, also need to pay attention to see whether the belt tightness is appropriate, to timely adjust the tensioning device; During the operation of conveying roller, check whether the motor, gearbox, transmission gear, bearing bush, coupling, transmission belt, roller, idler and so on are normal; The parts of the conveying roller must be firmly connected, without cracks, deformation or abnormal sound.

The use of conveying roller, it should be noted that the starting sequence is starting from discharging end to feeding end. When the conveyor roller in operation, it should be noted that must first idle a cycle, after the inspection of the normal parts, before loading operation; Conveyor roller after operation, operators must concentrate on their posts, belt drivers often patrol the route, find problems, timely elimination.

Conveying roller is often used, also should pay attention to often check the grounding protection and insulation of this electrical equipment, the motor should also be often measured and checked with meters, and regular maintenance. When the equipment is running, it is forbidden for anyone to walk across the belt or take the belt.

Conveyor roller in use to pay attention to often clean the belt roller above the soil. Do not use triangle pick, shovel and stick to clean without stopping. Feeding on the conveyor roller belt must be uniform to prevent overfeeding, crushing the belt, affecting the safe operation of the machine.

Transport roller in the use of, relatively important, it should be noted that no heavy vehicle parking (except emergency); If there is a sudden power failure phenomenon, should pay attention to immediately to cut off the conveyor roller power supply; Stop feeding before the first stop, until the conveyor roller belt on the material all unloading, can signal stop. When several belts are connected in series, the stop sequence is from feeding end to unloading end.